Technical Information
Details, Specifications, and Autocad Drawings

Component Dimensions

• Classic Traditional
• Classic Beadboard
• Classic American
• Classic Modern
• Classic Cottage
• Classic Rustic

Product Use

This product should not be installed in areas where it is likely to come in contact with water, such as tub and shower enclosures.

This product should not be installed in any area where the temperature is likely to exceed 120° Fahrenheit for more than a short time.

This is an interior product and cannot be installed outdoors.

New England Classic products are made with premium wood veneers and will have natural variations in grain, color, texture, etc. These variations are the essence of the woods' beauty and romantic appeal.

Cutting: A carbide-tipped saw blade designed for cutting laminated materials, or one with the following specifications will provide high quality cuts.

• Alternate face bevel, hollow ground, or high angle alternate top bevel (>15°)
• 5° side clearance
• Positive hook of 15° or greater
• 60 to 80 teeth (10" dia. blade)

Fasteners - Nailing: For best results use 8d (2-1/2") finish nails in the grooves (no grooves in Classic Modern) built in to the rails and 4d to 8d finish nails to attach cap and shoe.

Pneumatic nail gun: Adjust air pressure until nail head sets below surface. To avoid splitting, do not nail closer than 2 1/2" from any end.

*or other manufacturer's equivalent

Hammer and nails: Pre-drill all nail holes.

Screws - use #7 x 2-1/4" trim head screws and pre-drill 1/8" pilot holes.

Finishing and Maintenance

• Classic Traditional
• Classic Beadboard
• Classic American
• Classic Modern
• Classic Cottage
• Classic Rustic

Product Specifications

• Classic Traditional
• Classic Beadboard
• Classic American
• Classic Modern
• Classic Cottage
• Classic Rustic

Autocad Detail Drawings

Please click here.

©Copyright 2000 - 2008, New England Classic
1625 North Grundy-Quarles Highway, Gainesboro, TN  38562